| | Viscosity
at 40°C | Melting
Point | Density
at 20°C | P | N | Flash
Point | Solubility | limits
(wt%) | at 5°C
**** |
| Kinematic Dynamic | (°C) | (g/cm3)** | (%) | (%) | (°C)*** | Mineral oil | Ester | Water |
| (mm2/s) (mPa.s) | | | | | | | | |
| Amine O | 107 (mPa.s) | ca. 5 | 0.94 | - | 8 | 175 (COC) | 5 | 1 | <0.01 |
| IRGACOR® L 12 | 1500 (mm2/s) | - | 0.96 | - | - | 150 (COC) | 5 | 3 | <0.01 |
| IRGACOR® L 17 | 850 (mm2/s) | | 1.02 | | | 130 (COC) | 5 | 1 | <0.01 |
| IRGACOR® L 184 | 80 (mm2/s) | - | 1.15 | - | | not applicable | 0.1 | 0.1 | 5 |
| IRGACOR® L 190 | solid (wet cake) | 180-182 | 1.1 | - | 17.6 | not applicable | 0.1 | 0.1 | 0.1++ |
| IRGACOR® L 190 PLUS | solid (free flowing) | 180-182 | 1.1 | - | 17.6 | not applicable | 0.1 | 0.1 | 0.1++ |
| IRGACOR® DSS G | solid | 200 | 1.42 | - | - | 100 (PM) | 0.1 | 0.1 | 5 |
| IRGACOR® NPA | 1750 (mm2/s) | 0 | 1.03 | - | - | 130 (PM) | 5 | 3 | <0.01 |
| IRGALUBE® 349 | 2200 (mPa.s) | 10 | 0.92 | 4.8 | 2.7 | 135 (PM) | 3 | 5 | <0.01 |
| SARKOSYL® O | 350 (mm2/s) | - | 0.96 | - | 3.7 | 130 (COC) | 5 | 5 | <0.01 |
* The values in this table are typical values only. Actual values will vary within the range indicated in the product specification.
** Densities reported for solid products at 25°C ( method ASTM D 2638 - helium pycnometer).
*** (PM) = Pensky-Martens, (COC) = Cleveland Open Cup
**** These are approximate solubility levels. Values will vary depending on the base fluid characteristics, storage conditions and other additives present.Generally it is recommended that the additive solubility is checked in the finished fluid. Mineral oil = ISO VG 32, Ester = Diisodecyl adipate. Some of these products may hydrolyze in contact with water.
++ pH adjusted with triethanolamine (TEA) or another base to ph > 8 can increase solbuility to > 5% in water.
|
