Ciba® AGEFLEX AMA
Allyl Methacrylate CAS 96-05-9

• Purity: 99.4%, Inhibitor, MEHQ: 150 ppm.
• Differential allylic/methacrylic reactivity, gives hardness, crosslink density and grafting sites, source of silane couplers.
• Used in thermoplastics, paints, rubber and personal care polymers.

Ciba® AGEFLEX BGDMA
1,3-Butylene Glycol Dimethacrylate CAS 1189-08-8

• Total ester: 98.0%, Inhibitor, MEHQ: 200 ppm.
• Gives high crosslink density, hardness and chemical resistance.
• Used in impact modifiers, rubber compounding, adhesives, composites, plastics and acrylic sheet.
  Product information

Ciba® AGEFLEX EGDMA
Ethylene Glycol Dimethacrylate CAS 97-90-5

• Purity: 97.6%, Inhibitor, MEHQ: 200 ppm.
• Gives high crosslink density, hardness and heat resistance.
• Used in rubber, toner resins, optical products and dental polymers.

Ciba® AGEFLEX DEGDMA
Diethylene Glycol Dimethacrylate CAS 2358-84-1

• Purity: 99.4%, Inhibitor, MEHQ: 200 ppm.
• Gives crosslinking, impact strength and adhesion.
• Used in anaerobic adhesives, caulks, photopolymers and dental polymers.
  Product information

Ciba® AGEFLEX T3EGDMA
Triethylene Glycol Dimethacrylate CAS 109-16-0

• Purity: 98.7%, Inhibitor, MEHQ: 325 ppm.
• Gives crosslinking, impact strength and adhesion.
• Used in anaerobic adhesives, caulks, photopolymers and dental polymers.
  Product information

Ciba® AGEFLEX PEG200DMA
Polyethylene Glycol 200 Dimethacrylate CAS 25852-47-5

• Purity: 97.1%, Inhibitor, MEHQ: 400 ppm.
• Gives crosslinking, impact strength and adhesion.
• Used in anaerobic adhesives, caulks, photopolymers and polymer concrete.
  Product information

Ciba® AGEFLEX EO4BDMA
Ethoxylated (4) Bisphenol A Dimethacrylate CAS 41637-38-1

• Purity: 98.0%, Inhibitor, MEHQ: 200 ppm.
• Gives low shrinkage, adhesion, impact strength, heat resistance and high refractive index.
• Used in inks, adhesives, cast lenses, plastics and electronics.

Ciba® AGEFLEX TMPTMA
Trimethylolpropane Trimethacrylate CAS 3290-92-4

• Purity: 97.2%, Inhibitor, MEHQ: 150 ppm.
• Gives high crosslink density, heat and chemical resistance.
• Used in rubber, coatings and paints.
  Product information